Katie Bruce (right image taken by Katie)

This week was filled with work but also play. Residents Katie and Jane continued their pieces from last week. Katie brought in a new colour to her embroidery pieces which really highlight the embossed areas found in our old wood floors. Jane started a new print inspired by the many cat pictures she has up in her studio and also finished her prints from last week with glitter and sequins.

Jane Wiseheart

Kyle and I ran a private silkscreen workshop which went really well and we are happy to have two new open studio members at Spark Box because of it! We also met with Kristy from Pathways to Independence in Trenton and are going to be hosting a workshop with a group their later this month.

Cooking at From the Farm

This week also brought a lot of cooking and great food. My mother, sister, grandmother and I went to a cooking workshop at From the Farm where we learned the art of cooking Italian food. We made a four course meal during the four hour. We started with an artichoke dip, followed by handmade ravioli, the main course brought pesto wrapped pork with roasted fennel and arugula salad and finally an upside down apply cake. Amazing!

A Weekend Away

In addition to the cooking, printing and workshops of this week Kyle and I spent a lot of time outside. We went away for two days this past weekend to a friends cottage on the Kawartha Lakes. It was a great little break and a nice weekend with friends we don’t see very often.  We also starting working in the garden which is hard work but extremely rewarding.

Our Garden

Share this post:

Katie Bruce taking an embossment of our floor

This week was packed full and left Kyle and I feeling a bit under the weather.

The week started with us happily welcoming our new residents Katie Bruce and Jane Wiseheart.

Katie Bruce joins us from Alberta and will be working on her delicate modified embossment pieces. This week she took an embossment of our living room floor and has started the embroidery element.

Jane Wiseheart, from Boston, drew out the stencils for her first silkscreen piece. If you think this part looks great wait until you see it with glitter! That’s right she “glitterfies” each work.

Intern Nick Taylor working on our new promo material

We also started working with our new graphic design intern Nick Taylor. Nick is a student at St. Lawrence College, he will be working with us for the next couple of weeks. This week he started putting together a new series of promotional material for our workshops, curio shop and open studio.

We got up to a number of other things this week like saying farewell to former Oeno Gallery staff member Ivan Tanzer who is off to work at the Galerie de Bellefeuille in Montreal and hanging some of our new work at Angeline’s Inn for their photo shoot with Toronto Life.

As I mentioned before all of this activity left us both feeling a bit under the weather but I found some links that made me want to drink a big glass of OJ and get working:

-This awesome design magazine Udo Mag.

-Nell Casson’s inspiration for the mural painting for the outside of the studio– Steve Powers.

-My Pinterest Board for Green Spaces (I have also been working in the yard a lot recently … can’t wait to plant our garden)!

-This hilarious and awesome tumblr site by magazine editor Ann Friedman (found on Cup of Jo).

I hope this week is productive and fun!

-Chrissy

Please share this with others:

Works in Progress by Kristy Lynn

Works in Progress by Sylvia Chan

This has been such a fun week. The weather was amazing and I felt inspired and productive. Early in the week we picked up our two new residents Kristy Lynn and Sylvia Chan. Both have been amazingly productive over the week resulting in a studio full of new paintings.

Works in Progress, New Linocut Prints by Kyle Topping

Kyle and I have both been putting a lot of focus on creating our own work. It’s amazing how challenging it can be to get into the studio. Kyle printed his vintage camera series early in the week (they will be going up on Etsy shortly) and began a new series of reductive linocut vintage trailers. I have been working on a new series of bags inspired by my trip around North America in 2008 (finally putting those pictures to use)!

Last week we also went to City of Craft in Toronto. It was so nice to head out of Picton for a day in the city. Ever since meeting Jen Anisef, creator of Toronto Craft Alert and former organizer for City of Craft, Kyle and I have all become interested in participating in sale.  When I found out there was a spring sale I was set on heading to Toronto to check it out. It was a rainy day but a nice afternoon of visiting some of my favorite regional makers:

*Kid Icarus who had these awesome 3D posters of flying Canadian Geese.

*Raymond E. Biesinger who had funky large scale geographic prints of different cities.

*JP King and Kirsten McCrea who had many great prints, postcards and little books of poetry.

* Lines by Davis who had his kitty cat printed bags and textiles, plus these new wax canvas bags (which I loved!).

*Bookhou who had their collection of clean and simply designed textiles (the large pouches are my favorite).

*Field Guided who had a selection of lovely silk scarves along with tote bags and prints.

Hope you had a great week too!

If you like these Ontario artisans perhaps others will too:

How to re-stretch mesh onto an aluminum frame:

1. First, take the broken screen and cut a ‘plus’ sign into the mesh. I found that this gave me a good starting point to ripping the mesh off. When I tried using a X cut from corner to corner, it left a lot of remaining screen debris towards the corners. Rip the mesh along one edge towards the corner, then rip the other edge towards the same corner, now rip the corner section off. Repeat this for all the edges.

2. You may see that there are bits of mesh still remaining glued down near the corner, try to remove what you can by picking at it and hopefully you can pull it off. I found that using a utility knife helped in removing the last bits. Don’t worry too much if there is some remaining, when we grind the frame it’ll come off.

3. If you can, go outside and set-up a work table. You will be grinding aluminum and thus creating dust, so doing this process inside the studio was a big ‘no go’. You will need several tools. A metal grinder with a grinding disk, palm sander with 80-120 grid sand paper, particle respirator (not a dust mask, a real respirator, protect your lungs), gloves, clamps, and safety goggles.

4. I clamped the screen down to the table, and begun lightly grinding the frame. The idea is to remove all the glue off the frame and at the same time give the frame tooth to accept a new layer of glue. When you’re grinding the frame you’ll want to be careful not to spend too much time in one spot otherwise you may grind a pit into the frame, and that’s not good.

5. Afterward I used the palm sander to quickly run around the whole frame, this cleaned up some (not all) ink stains, hardened emulsions, or weird glue deposits from tape. When finished rub the frame clean with a rag.

6. Set-up a large station inside, I had to push to a couple desks together. I recommend that you avoid using the floor as a work surface, the mesh is oddly charged with static electricity and will pick up all the dirt off the floor. The stretcher we bought came disassembled in 8 pieces and was really easy to build following the manufacturers instruction.

7. Once the system is set-up and the frame in place, coat the frame with a layer of glue. We purchased the glue from the same company that sold us the stretcher, it is clearly an extremely strong contact cement. I recommend that you open a window and wear a vapor rated respirator mask.

8. It takes 8-10 minutes for the glue to become ‘dry to the touch’. At this point lock into the stretcher your desired new mesh. Crank all the clamps down onto the mesh and begin stretching each side a little bit at a time. You can buy a tension meter which will tell you exactly what tension of the screen is or I compared the tension to another commercially stretched screen we had in the studio.

9. When you’re happy with the tension cut a piece of cardboard slightly smaller than the interior of the frame and place it on the screen. Now apply a second layer of glue to the frame. The cardboard prevents any stringy bits of glue from falling onto the middle of the screen. Like I mentioned earlier the screen has a lot of static electricity and so it tends to attract the stingy glue. Once done let the frame sit for 25 minutes.

10. When you loosen all the clamps and remove your newly stretched frame cut off the excess screen mesh. Finally, use metal foil tape (purchased from a hardware store in the duct working aisle ) to cover the glued side of the screen. That’s it, finished.

If you liked this How-To for screen printing share it with others:

In September 2011 we hosted Philadelphia printmaker Josh Dannin at the residency. He stayed with us for a month and worked on two relief print pieces. Josh’s work “has evolved to feature a series of relief prints that comment on social and political turmoil. Much of [his] work touches on contemporary political gridlock and the absurdity of such a thing. In the form of dictator-like portraits, satirical caricatures, and bold text, [he] references the turbulent times of today. Citing words made famous by dystopian writers such as George Orwell and Aldous Huxley, [he] is intrigued by how the themes these authors address increasingly parallel modern society. What originated as fiction has, in certain aspects, become reality.”

"Granny Smith", Linocut, 2011

“Not My Cup of Tea” and “Granny Smith” were the final pieces done by Josh at the studio. These works reflect some of his recent work which has  “…grown increasingly fascinated by the topic of evolution, and where it falls in political discourse. The close relationship between humans and chimpanzees is one that is confirmed by science yet remains debated among ideologies. The clash of Darwinism and Creationism, among other absurd political arguments, will act as a platform for future projects, in which he intends to experiment with print-based installation works.”

"Banana Republican", Woodcut, 2011

"Theory Of...", Linocut, 2011

Josh was a great resident and has remained a really good friend. Two weeks ago we had the chance to see the BFT Wolfbat project he worked on in New Orleans while we were down attending the Southern Graphics Conference (to read about that project click here >>). We hope to have Josh back to work in the studio again soon and wish him good luck with his MFA program he recently was accepted to.

"Wolfbat Box Car", Bill Fick, Carter Eggleston, and Josh Dannin, 2012

Wolfbat Box Car", Bill Fick, Carter Eggleston, and Josh Dannin, 2012

Share this post with others:

Last week I went on the road to New Orleans for the South Graphics Conference. This was the first time attending this conference, actually this was the first conference Spark Box Studio has ever attended, needless to say I was pretty excited. Sadly, since we had residents booked in I had to make this trip alone, which meant a lot of long days and lonely travelling. Lucky for me tons of like-minded printers attend this event every year so the loneliness was short lived.

The trip began early Thursday with a 4 am drive to the Toronto airport. With just one minor hang-up with customs, I was quickly jet-setting to Louisiana. I arrived early afternoon, dropped my publisher booth stuff off and headed to my accommodations (which I found on Air BnB). The rest of Thursday was made up of searching for groceries and relaxing on the roof top of the loft I was staying in.

Friday was day one of the conference. Spark Box had a booth in the publishers fair so I left early to set-up my table. I took a walk through the beautiful, yet very smelly, French Quarter to the Sheraton Hotel where the conference was being held. I was the first publisher to arrive … which made me feel like a silly eager Canadian. But my eager attitude paid off leading me to meet so many nice people and share information to them about our studio and residency. Because of that minor customs hiccup I wasn’t allowed to sell any prints … but I did get to speak about them and the great printmakers who created them. I was set-up near the Robert Blackburn Printmaking Workshop Program and got to met Chris Dunnett and Phil Sanders. I now hope that I will get some time to go to NYC and check out their space.

I left the publisher fair early that day to attend one of the demonstrations being held at Tulane University. The demonstration was being done by our university print professor Otis Tamasauskas. The drive to the demo was longer than I thought so I only caught the tail-end but made plans to go out with Otis later in the evening. We met up at the hotel and together with Gravity Press owner Brandon Graving we went to the evenings art walk. My camera died by this point so I didn’t get any pictures but the night was great. We stopped at the Community Print Shop, the exhibit at the Healing Center and Deborah Cornell and Barbara Putnam’s exhibit at the New Orleans Center for Creative Arts.

Saturday was another early morning walk to the hotel in order to re-set-up the publishers table (they moved us for day two). I decided the smell of the French Quarter at 7AM was a bit too much so instead I walked along the river. Day two of the publisher fair was held in conjunction with the portfolio sessions.  It was a great day. I split my time standing at the table and walking around looking at all the amazing and talented printed works. Splitting time between the table and other events was a challenge since I was by myself but next year Kyle will attend as well and we will have more time to go to the lectures and demos.

Past resident Josh Dannin came by the booth just as I was packing up and we headed to the Wolfbat Railroad event that he had been participated in over the week. The BFT Wolfbat Railroad was another printmaking project going on at the same time as the Southern Graphics Conference but not in conjunction with it. Wolfbat Studios (Dennis McNett) & Woodcut Funhouse (Sean Starwars) teamed up with Vans Custom Culture to host a three day customization event that was 100% free and open to the public. As the organizers explained it “The event included the construction of a wooden train consisting of 1 steam engine & 20 box cars. Artist, educators, and college students from across the U.S. tricked out their boxcar with screen prints, woodcut prints, flags, paper mache structures, and what ever else they can come up with. Each artist or team worked with at least 2 local high school and/or middle school kids.”

Saturday evening was the culmination of this three day event and was celebrated by taking the train on parade through the Marigny/Bywater area. After the parade there was a party with a great brass band and tons of dancing printmakers. It was a great time and a wonderful way to end the weekends events.

Sunday was my last day in New Orleans and I spent most of the day hanging out with Josh. We did a ton of tourist like things – walk through the French Quarter market, check out all the great street performers, eat beignets at Cafe du Monde and walk around Bourbon Street. After Josh headed back to Philadelphia I went to the botanical gardens with my accommodations host Andrea and then out to dinner.

It was a great trip and I am happy that we decided to participate in the events this year. We are definitely going next year in Milwaukee.

-Chrissy

As you know Kyle and I made the choice to make our studio as safe and green as possible, so there are some processes, like stone lithography, that we can’t offer at the studio. Of course stone lithography happens to be my favorite print process. So, you can only imagine my joy when I stumbled across a video by French artist Emilion explaining a new technique called “Kitchen Litho”. In the video Emilion walks you through her process of drawing with a grease tool (in this case soap made with animal fats) onto tin foil, etching the image with Coke and printing it like you would a litho stone.

I was amazed at how simple she made the process look and excited to get into the studio and give it a try. I called on a few former workshop participants and a couple friends to see if they would be interested in trying this new method with me and the six of us got together a few weekends ago.

We started our afternoon of experimental printmaking in the kitchen, as to keep with the theme of the process, but seeing little success moved out into the studio in order to use the printing press. Unlike the video the process was a bit more challenging. Like stone lithography sometimes your image doesn’t etch into the tin foil or it begins to fill in after a couple prints. However, unlike with stones you can simple crumple up the tin foil and try again– quick and easy!

We experimented with a number of different drawing tools to see what worked the best. We tried lithography crayons, sharpie markers, touche and Crisco. We wanted to see the different textures we could achieve and if spending the money on lithography crayons was worth it. It turned out that sharpie marker was the most reliable tool while the lithography crayons were a close second.

While achieving a print was challenging, the process itself was amazingly easy. Draw your image on the tin foil, etch it with Coke, rub it with vegetable oil, ink it and print (see the whole process in the video on Emilion’s blog). After a great afternoon several of us left with a some good prints and I plan to keep experimenting with this process in the future.

If you found this interesting share with others:

For the past three years we have been given the opportunity to have the students of the Loyalist College Art and Design Foundations Program come to our studio to learn acrylic resist etching. As with prior years the workshop this February was a great success. There were over 30 people working in the studio but by having organized the space with inking station, drypoint stations, printing stations and drying stations each student had a chance to experiment and print a number of times.

With past workshops Kyle and I would prep all of the plates for the students, which meant cutting the copper, file the edges, degrease the copper and apply the hard ground resist. But since Kyle and I are teaching in the program this year we had the chance to show the class how to prep plates and coat them with the hard ground. Although this is not the most interesting part of the process it was great for us to share this step ( it is pretty crucial step to the etching process). There is always the fear with acrylic resist etching that degrease process was not done properly, potentially causing the hard ground not to adhere to the copper. Luckily each student did a great job applying their ground and not one plate was lost in the etching process.

The students had one week to draw their image onto their plates, after which they were brought to the studio where Kyle and I etched them and prepped them for printing. The workshop only ran for three hours and within that time 90 prints were made by the class.

*Above print done by Colleene Rowley

If you liked this post share it with others:

Kyle and I just finished a bunch of new work for our two-person exhibit at the John M. Parrott Art Gallery. For this show we decided to create a new body of printed work. Kyle took a very traditional approach working with copper plate etchings while I took a more experimental approach combining silkscreen with encaustic painting and collage with watercolour monoprints. For this post I wanted to write about the monoprint because I think monoprint is a pretty unappreciated technique.

I first tried monoprinting when I was attending Queen’s. Our second year print professor, Jan Winton, had us work in this process for several months. With the pressure to pull great prints that would later be judged by faculty and fellow students I was easily frustrated with this painterly print method. Having worked mostly with paint prior to this experience I expected monoprinting to be no sweat but there was more to it then just putting ink onto copper. I quickly started to appreciate the attention to colour required and the way positive and negative space needed to be approached. You really have to consider space, layers, collage and texture so much more than with a painting. The “surprise” element that comes along with printmaking was also something that took some time to get used to but also became a highlight to this process.

Since that class I have used monoprint sparingly in my work– introducing it from time to time to bring a bit more life to my etchings. However, for this latest series of work I used it as one of my primary methods. Instead of using ink I choose to use watercolours. While this process takes a bit more time I wanted the washy, transparent qualities you can achieve with watercolour paints. I took the prints cut them up and collaged them together, finalizing them with embroidery and stitching (sorry for the terrible image once I have others I will update this post).

I appreciate what can be learned from monoprinting as a beginner. During my second year I was unsure why Jan had decided to start with monoprint rather than something “cooler” like silkscreen but now I can see her reasoning. Printmaking takes so much more planning, consideration and attention. Each step significantly effects the end result. Since monoprinting is a much faster and more forgiving technique than most other processes it gives you the chance to play around in the print studio. This speed allows you t understand the printing inks, to use a printing press and to consider how colour, layering, pressure and paper play a huge roll in the final print.

If you are interested in learning about monoprint consider signing-up for a workshop (find out more by clicking HERE).

If you liked this post others might too:

Carl Wiens’ silkscreen pieces are near completion with just one last layer. Can’t wait to see them all finished! Looking forward to seeing some more people working in the Open Studio including Nicole Armour. If you haven’t seen Nicole’s handmade books you really should take a look, they are beautiful! She also has a very insightful blog about books, movies, music and friendship called The We of Me.

We are excited to start another month and invite new people into our home and studio. On Wednesday we picked up our newest resident coming to us from Israel and staying for two weeks. Nava Astrachan will be working on three etchings during her stay. (image below taken from HERE).

On Thursday Kyle and I got to see all of our work up at the John M. Parrott Art Gallery and share the moment with our friends and family. The evening was a success and we were so happy to see friendly faces out for an evening in Belleville to support us and our work.

The end of this week finds the end of Sarah Burwash’s residency with us. It has been great having Sarah at the studio. I love her work and will be sad to see her go. I mean just look at this map she made of the area … awesome!

If you like this post others might too: